On the top of your Carepod Cube, there is a main control panel with four buttons.
From left to right: Power, Mist, Timer, and Heater.
The Power button allows you to turn on and off your humidifier. Press this once to turn your Carepod Cube on. If the water tank is full, it will initiate hydration with Level 3 Mist, as indicated by the white LED light.
To stop humidification, press the Power button again. Your Carepod will automatically shut off after 30 seconds. Please note that the Power LED light will turn red when it detects a low water level in your humidifier.
The Mist button allows you to adjust the amount of humidity your Carepod emits. Press the button to cycle to the next level of intensity.
- Level 1: Low mist
- Level 2: Medium mist
- Level 3: High mist
The Timer button lets you set a run time for humidification. Press the button to cycle to the next level of duration.
- Level 1: Four hours
- Level 2: Six hours
- Level 3: Eight hours
For each button, you can press through to cycle through different levels or settings. Please note that the LED indicator lights will change as time passes to indicate how much time is remaining. Not setting the Timer means continuous operation, until water runs out.