I just received my Carepod Cube Plus humidifier. How do I get started?

Here’s how to get started:

1. Unbox and take out your new Carepod.
2. (Optional step) Attach the four legs with the included screws. Screwdriver not included.
3. Lift the lid of the humidifier.
4. Remove the tape securing its lid.
5. Attach the white wand into the inner lid. Lift it slightly so it’s parallel to the inner lid.
6. Move your Carepod to your desired space for hydration.
7. Set your Carepod on top of a table, stool, or elevated surface that’s at least two feet off the floor. This will help the mist circulate properly and keep it from collecting on the floor.
8. Fill the water tank up to the MAX line with filtered/distilled water.
9. Gently pull the white wand down, toward the direction of the tank.
10. Close the lid.
11. Connect the power cord.